1. <thead id="l3l4x"><optgroup id="l3l4x"></optgroup></thead>

        1. <label id="l3l4x"><meter id="l3l4x"><bdo id="l3l4x"></bdo></meter></label>

          1. Jumper T-Pro radio

            Jumper?has released new gamepad style radio controller called T-Pro. Looking at the radio you can see that its design is clearly similar (“inspired by”) TBS Tango 2 and/or DJI Remote Controller V2?radios. Jumper “borrowed” the best design aspects from the both radios. The top part of the radio is more similar to the DJI Remote and the bottom part resembles TBS Tango 2.

            It will have internal 4-in-1 multiprotocol?at first and then version with?internal?2.4GHz ExpressLRS modules will be released with foldable and non removable antennas that can’t be oriented vertically (be the way, the recommended position of the dipole antenna should be vertical)

            Jumper T-Pro will have the same gimbals as on the Jumper T-Lite radio, navigation scroll wheel as on?TBS Tango 2 and three buttons for menu control. There are two trimmer joystick switches and the neck strap hook in the middle. 6-pos push buttons are located on the top side of the radio. T-Pro is equipped with 128×64 monochrome LCD screen.

            There will be two 3-pos toggle switches (similar as on TBS Tango 2), two momentary switches and two scroll wheels.

            Jumper T-Pro will have JR Lite (Nano) TX module slot for Multiprotocol, ExpressLRS or TBS Crossfire/Tracer modules.

            There is also Jumper T-Pro version with integrated ExpressLRS module. Up to 1000mW (30dBm) of RF power output.

            Jumper T-Pro switches and buttons layout diagram. (Glossary: “Hall rocker” – hall effect gimbal, “Fine-Tuning” – trim button, “Unlock button” – momentary button ??)

            A video of the working prototype:

            Jumper will be offering the external ELRS AION Nano TX module. It will have the LCD screen for settings display. No joystick, so you need to use LUA script for settings.

            The computer generated pictures of Jumper AION Nano TX module:

            Jumper T-Pro Radio User Manual: https://www.jumper-rc.com/wp-content/uploads/2022/01/T-Pro-Manual.zip

            Release date: 2022-01

            Available @
            Makerfire:?(you can use my?5% discount code “MONTIS“):
            Internal 4in1 mutiprotocol module:?https://shop.makerfire.com/products/jumper-t-pro-jp4-in-1-multi-protocol-remote-controller
            Internal ELRS module:?https://shop.makerfire.com/products/jumper-t-pro-expresslrs-elrs-internal-module-radio-controller-2-4g-1000mw

            Features:
            JP4-in-1 Multi-protocol module included. DSM2/X, FrSKY, SFHSS, FlySky, FlySky AFHDS2A, Hubsan?etc.
            or
            Internal ELRS module??1000mW maximum output power.
            OpenTX firmware
            Hall sensor gimbals
            ELRS Nano / TBS CRSF Nano compatible module bay on rear side.
            USB-C internal charging
            Up to 16 channels of output (depending on the receiver)
            Power supply: 2 x 18650 Lion batteries
            Haptic feedback function
            Support telemetry (depending on the receiver)
            LUA Script support: Yes

            Specifications:
            Working voltage: DC 6V-8.4V (2S)
            Firmware: OpenTX
            Display: 1.3 inch LCD display, 128* 64 resolution
            Gimbal Type: HALL Sensor
            Upgrade method: USB online upgrade
            Simulator mode: 3.5mm standard ppm output or USB
            Battery: 2×18650 (Battery not included)
            External Micro SD Card: micro SD card slot
            Size: 160*128*68
            Weight: 488g (without battery)

            Jumper External AION ExpressLRS transmitter module specifications:
            Model:?AION ELRS 2.4TX-NANO
            Main control chip: ESP32
            Transmitting power:?10-500mw
            Frequency bandwidth: 2.4GHz-2.5GHz
            Compatible firmware: ELRS
            Antenna: omnidirectional high gain diamond antenna
            Quick socket: NANO (JR lite) interface
            Working voltage: DC5-8.4V
            Maximum refresh rate: 500Hz
            Screen form:?0.96 inch white light OLED
            Screen resolution: 128*64
            Menu button:?five-way joystick
            Upgrade method: UBC-C or Bluetooth
            Simulator: supports Bluetooth and WIFI wireless mode

            Comments
            1. Pete Bumps
              • montis
            2. dokp
              • montis
            3. Pete Bumps
            4. 33eyes
            5. T Ramp
              • montis

            Leave a Reply to dokp Cancel reply

            Your email address will not be published.

            *

            主站蜘蛛池模板: 国产精品亚洲一区二区三区| 又粗又大又猛又爽免费视频 | 免费看韩国黄a片在线观看| 亚洲国产二区三区久久| 国产精品偷伦视频免费观看了| 久久亚洲综合色一区二区三区| 男女啪啪免费体验区| 日韩精品电影一区亚洲| 美美女高清毛片视频黄的一免费 | 亚洲人成影院在线无码观看| 日韩免费高清一级毛片| 日韩在线一区二区三区免费视频| 免费国产在线观看老王影院| 水蜜桃视频在线观看免费| 亚洲无码精品浪潮| a毛片在线免费观看| 91亚洲精品视频| 最近免费中文字幕视频高清在线看 | 国产一级在线免费观看| 亚洲色偷偷综合亚洲AVYP| 无码精品国产一区二区三区免费 | 日韩毛片免费无码无毒视频观看| 亚洲人成网男女大片在线播放 | 中文字幕成人免费高清在线| 久久久久无码精品亚洲日韩| 在线看无码的免费网站| 男人天堂2018亚洲男人天堂| 免费国产真实迷j在线观看| www.av在线免费观看| 亚洲色四在线视频观看| 久久久久久99av无码免费网站| 蜜臀亚洲AV无码精品国产午夜.| 亚洲中文字幕成人在线| 午夜影院免费观看| 亚洲人成无码网站在线观看| 亚洲综合日韩久久成人AV| 91免费在线播放| 无码毛片一区二区三区视频免费播放| 亚洲AV永久青草无码精品| 成年人视频在线观看免费| 三年在线观看免费观看完整版中文 |